Humidity Cell
ANNOUNCEMENTS
Ventacon Wotton Limited
FOURIER TRANSFORM RAMAN CELLS
Designed and optimised exclusively for Fourier Transform Raman Spectrometers
HUMIDITY CELLS – SERIES HH
Humidity Cell
Ventacon’s Series HH Humidity Cell enables the user to study powdered specimens at temperatures between 40 and 180ºC in a controlled environment.
The cell consists of an oven containing the rotating sample. The sample is held in a rotating tubular cuvette sealed at the bottom with a sintered glass frit. Gases are passed downwards through the sample at known constant temperatures (35-180ºC) and controlled humidity.
To minimise the risk of sample heating due to the laser, a motor rotates the sample at speeds between 0 and 50 rpm.
The user can opt to provide their own stream of gases/vapours needed to control the study environment, OR purchase the Model HA-1 humid air source from Ventacon. The HA-1 indicates the RH of the gas passing through the sample. The sample temperatures are measured and controlled by a heater – thermocouple combination. This is supported by either the D1 OR the DI COMM Universal Power Supply.
All Ventacon FT Raman Cells are supplied packed in a high quality foam lined equipment case. All cells are supplied with a full set of operating instructions.
Schematic of Humidity Cell
H = Heaters, S = Sample
ORDERING INFORMATION
Code | Description |
HH-1 | Humidity Cell |
HH-11 | Spare sample cuvettes |
HH-12 |
Spare heater elements |
HUMID AIR SOURCE – SERIES HA
The Ventacon Humid Air Source consists of a bench mounted unit, as illustrated below.
ORDERING INFORMATION
Code | Description |
HA-1 | Humid Air Source, supplying 10-50mls/minute |
HA-2 | Humid Air Source, supplying 50-300mls/minute |
HA-3 | Humid Air Source, supplying 30-1000mls/minute |
To contact us
Ventacon Wotton Limited
Chair Cottage
3 The Oatground
Wotton-under-Edge
Gloucestershire
GL12 7HX
United KingdomTelephone and Fax: +44 (0) 1453 843968
Email: sales [at] ventaconwotton.comCheck out our own web site at http://www.ventaconwotton.com